It is a requirement of employers to ensure operators are fully conversant and trained in the safe operation of equipment and machinery.
Packline can assist companies in meeting those needs with its onsite Manual Handling Training program covering the safe and effective use of your lifting equipment.
The onsite training program is carried out by qualified instructors
Refer to the Quick Start Guide for battery installation and charging before use. Operate the Compac using the remote control to raise, lower, grip or rotate the load as applicable. The unit automatically enters hibernation after two minutes of inactivity; press ON to reactivate it. Pressing the Emergency Stop will also place the unit into hibernation and it must be released before operation. Press and hold the relevant control button for movement and release it to stop; travel will stop automatically at its limits. On motorised attachments, the Deadman’s button must be held when releasing a load. Always apply the rear castor brakes during loading and unloading, never lower the attachment or load onto the Compac legs, and transport loads with the attachment approximately 300 mm from the ground, or as low as safely possible.
The Course aim is to provide an appreciation into the safe operation of manual lifting equipment Covering:-
