Packline’s Compac Drum and Barrel Handling Equipment is a proven and tested solution for most manual handling applications within industries such as Food and Pharmaceutical.
The standard lifter’s front castors are mounted facing forwards and allow for easy movement. The rocking pallet wheel assembly when mounted, allows for easy access to the pallet.
The rear castors are braked and supplied with a foot guard to protect the operator.
This drum handling equipment was needed in an environment where once loaded, the lifter needed to be pushed up a slight incline and onto a flat surface. For this reason, the front castors are mounted facing downwards and extensions added to the rear castors.
This enabled the drum lifter to ‘rock over’ the incline and onto the flat surface.
The drum handler’s column height was decreased to 1700mm to ensure that the lifter was suitable for a specific confined space, enabling the lifter to pass through a low height doorway.
It was important that the lifting attachment would not allow the load to swing forwards and backwards in any way. This would cause the lifter to become unstable, hence the clamp attachment was designed as a fixed solution.
Safe working load (SWL): 150kg or 300kg.
Charging Supply: 240v, 110v or 110v USA.
Leg Length: 350mm up to 1000mm.
Leg Width: 500mm up to 1000mm.
Column Height: 1100mm up to 2500mm.
Operation: push buttons or remote control.