The Stainless Drum Clamp Attachment with powered clamping and rotation was designed in response to a customer enquiry in the food processing industry to lift and rotate steel drums, minimising operator manual handling.

This fully powered drum handling solution transports 210-litre steel drums with liquid ingredients from the pallet to a vat or hopper for mixing.

The fully powered stainless clamp attachment is equipped with powered clamping and rotation through 180 degrees, as well as powered lift and lower functions.

The clamp attachment is suitable for the food industry and other hygienic applications and features FDA approved nitrile rubber pads.

The Clamp Attachment has been specifically designed to handle drums by providing powered lifting and rotating. An additional powered drive provides the grip and release action. The clamping mechanism is fitted with a torque limiter so that the gripping pads do not over or under tighten on the external diameter of the roll.

The clamp attachment is equipped with motorised rotation which provides swift and easy handling. This feature is controlled by a hand-held ‘pendant’ type control which means that the operator can observe the loading and unloading of the rolls for greater precision.

The raising and lowering actions of the Clamp Attachment are made by a battery powered mechanism which is operated by simple ‘up and down’ buttons that are located ergonomically on the machine’s handlebars. Ease of operation is further enhanced with a slow start feature that provides the operator with precise and accurate positioning when docking, loading and un-loading.

This attachment is entirely suitable for the food industry and other hygienic applications and features FDA approved nitrile rubber pads.
The attachment is backed up by a full bespoke design service ensuring the right solution can be made to suit most applications and requirements.

All Packline attachments are fully interchangeable and can be easily fixed or removed from any model of ‘Compac’ lifting machine that is fitted with the quick release system.
This attachment has a maximum capacity of up to 225kg (496lbs) depending upon the machine model.

Specifications:

  • Lift capacity: 225kg (496lbs)
  • Drum Length: 1200mm
  • Drum Diameter: 600mm (23.6 inches)