The clamping vertical spindle was designed in response to a customer requirement to handle heavy rolls of labels that tend to telescope during handling.

This vertical spindle attachment incorporates a single clamping arm with nitrile rubber pads to ensure that the roll is held securely in position.

The attachment is suitable for rolls of labels with a diameter of 450mm, where it is not necessary to clamp both sides of the roll.

The Vertical Spindle Attachment is fully motorised. This feature provides power for both the roll gripping and release as well as the roll rotation to and from the vertical to horizontal orientations. The control of these motors is made via a hand-held ‘pendant’ which provides easy operation and precise control.

The rolls are securely gripped by the core. This mechanism has a torque limiter fitted so that the clamping fingers do not over or under tighten in the core. This enables the operator to lift the rolls with complete confidence and safety.

A handwheel provides the clamping action of the single arm.

The clamping vertical spindle attachment is mounted onto a heavy-duty mild steel painted stacker truck with electric lift and manual propulsion. In addition, the truck incorporates straddle legs to straddle around the pallets for easy access to the rolls of labels.

The attachment has been designed to provide strength, durability as well as improved wear resistance and enhanced ease of use which provides a simple and safe action.

Specifications:

  • Lifting Capacity: 150kg (330lbs)
  • Roll Diameter: 450mm (17.7 inches)