Packline’s overhead horizontal rotation forward tipping clamp attachment can be used to lift rolls or drums up to a maximum safe working load of 50kg.
The clamp attachment allows the drum or roll to be lifted and rotated by 360 degrees horizontally and as well as vertically, via the forward tipping mechanism.
The clamp allows the drum or roll to be lifted and rotated by 360 degrees horizontally and vertically via two separate sets of rotational mechanisms.
On the clamp back plate there is an indexing plunger that, when disengaged, will allow the operator to rotate this back plate. This will re-orientate the drum or roll into the horizontal if required.
At each side of the forward tipping clamp attachment the pads are locked into place using lever indexing plungers. By releasing the plungers the drum can be easily manually rotated from the horizontal to the vertical or vice versa as required.
Safe working load (SWL): 50kg
Minimum Diameter Load: 230mm
Maximum Diameter Load: 600mm